Gas Systems

Gas Hot Water Systems Sydney: Continuous Flow & Storage

Gas hot water installation, repair, and maintenance for continuous and storage systems.

  • Instant gas systems
  • Storage gas systems
  • Energy efficient
  • Professional installation
Call 0420 102 207

Starting from $1,200

Professional gas plumber technician servicing Lacuna gas hot water system
90-minute response
Licensed NSW plumbers
Fixed written quotes
12-month workmanship warranty

About our gas hot water systems service

Infinity Hot Water provides fast, reliable gas hot water systems across Sydney, the Central Coast and Newcastle. Whether you are dealing with a sudden breakdown, planning an upgrade, or comparing systems for a new build, our licensed plumbers and gasfitters handle every job from initial site visit through to final commissioning and council compliance paperwork.

We service every major brand — Rheem, Rinnai, Dux, Bosch, AquaMAX, Vulcan, Sanden, Reclaim Energy, Stiebel Eltron, Thermann, Chromagen and iStore — and carry common spare parts on every van so most jobs are completed in a single visit. Gas hot water installation, repair, and maintenance for continuous and storage systems.

All work is quoted up front in writing, completed to AS/NZS 3500 standards, and backed by a 12-month workmanship warranty plus full manufacturer warranty on any new equipment installed. Call 0420 102 207 for a same-day appointment or request a quote online.

Gas hot water Sydney: continuous flow and storage installs and repairs

Gas hot water systems Sydney wide remain the most common choice for families with mains gas. We supply, install and repair Rinnai Infinity, Rheem, Bosch, Vulcan and Thermann units, and our gas fitters check meter and line capacity so your new hot water heater delivers full flow at peak demand.

If your gas hot water Sydney unit is dropping temperature, showing an error code or failing to ignite, our hot water plumber Sydney team carries ignition packs, gas valves, solenoids and water valves for same day hot water repairs on all major brands.

Continuous flow or gas storage: which suits your home

Continuous flow suits households that shower at spread out times, small homes where space is tight, and anyone who has run out of hot water on a Sunday night. It never runs out and loses nothing to standby heat, but it needs adequate gas supply and it will not perform at rated flow on an undersized line.

Gas storage still wins in a few situations: homes with low gas pressure, properties where multiple outlets are opened at once at low flow, and replacements where the existing flue and location make a swap far cheaper. We price both honestly rather than pushing whichever unit is on the van.

Common gas faults we repair across Sydney

Ignition lockouts, error codes in the 10 and 11 range, temperature that swings mid shower, a burner that will not stay lit, and water that only gets warm at high flow are the faults we see most. On older storage units it is usually the thermocouple or gas control valve; on continuous flow it is more often the flame rod, ignition pack, water valve or a scaled heat exchanger.

Sydney mains water is relatively soft, so scale is less aggressive here than inland, but ten years of use in a hard pocket or a bore fed property still narrows a heat exchanger. We descale where the unit is worth saving and tell you plainly when it is not.

What's included

Every job comes with these as standard.

Instant gas systems
Storage gas systems
Energy efficient
Professional installation

Why choose Infinity Hot Water

What sets our service apart.

Same-day service

Urgent jobs answered within 90 minutes across the Sydney metro, Central Coast and Newcastle / Lake Macquarie.

Fixed up-front pricing

Written quotes before work starts. No hidden call-out fees, no surprises on the invoice.

Licensed specialists

NSW-licensed plumbers and gasfitters with manufacturer accreditation for Rheem, Rinnai, Dux, Bosch and more.

12-month workmanship warranty

Every job is backed in writing, on top of the full manufacturer warranty on any new equipment.

Genuine spare parts

Vans stocked with valves, elements, thermostats, anodes and PTR valves so most repairs are done in one visit.

Rebate paperwork handled

For heat pump and solar installs we lodge the small-scale technology certificates (STCs) so you receive the rebate at point of sale.

How our gas hot water systems service works

1. Site assessment

We measure your household demand (people, bathrooms, peak usage), check existing connections, and recommend the right size and type of system.

2. Fixed written quote

You get an itemised quote — unit, install, removal of the old system, valves, electrical or gas work, and any compliance certificates — with no hidden extras.

3. Professional installation

Licensed plumbers and gasfitters install to AS/NZS 3500, comply with the relevant gas / electrical / energy ratings, and remove the old unit from site.

4. Commissioning & paperwork

We commission the system, set safe tempering valves to 50°C, lodge compliance certificates and register the manufacturer warranty in your name.

Gas Hot Water Systems pricing

Indicative pricing across Sydney, Central Coast & Newcastle. Every job is quoted in writing before any work begins — no hidden call-out fees.

ItemFrom
Gas Hot Water Systems — call-out & diagnosis$0
Typical gas hot water systems job$1,200
After-hours / weekend surchargeFrom $90
Full system replacement (if recommended)From $1,500
Call 0420 102 207

Brands we service

Accredited service and installation for every major Australian hot water brand.

RheemRinnaiDuxBoschVulcanAquaMAXStiebel EltronSandenReclaim EnergyiStoreThermannChromagen

Gas Hot Water Systems — frequently asked questions

Gas Hot Water Systems — suburbs we cover

Related services

Need gas hot water systems today?

Call Infinity Hot Water on 0420 102 207 for same-day service across Sydney, the Central Coast and Newcastle — or request a written quote online.

Call 0420 102 207
Call Now